• Equipment
  • Plant size
  • Manufacturing equipment
  • Machining equipment
  • Inspection equipment
  • Products
  • Product
  • Service idea
  • Innovative
  • R & D personnel
  • Hardware and software support
  • R & D achievements
  • management
  • Quality system
  • Honorary
  • Owner
  • OEM
  • contact us
  • Talent strategy
  • Contact us
  • Message feedback
  • 图片名称
    Your current location : Home page >> News >> Media materials

    Treatment method for medium leakage of marine heat exchanger

    2020-11-05 14:40:08
    second

    Treatment method for medium leakage of marine heat exchanger

     


    1. In the non pressure state, re clamp the equipment according to the clamping size provided by the manufacturer, the size should be uniform, the deviation of the pressing size should not be greater than ± 0.2N (mm), n is the total number of plates, and the parallelism between the two pressing plates should be kept within 2mm.

    2. Mark the leakage part, then disassemble the marine heat exchanger, check and solve the problem one by one, and reassemble or replace the gasket and plate.

    3. If there are no spare parts, the deformed parts can be temporarily removed and then reassembled for use.

    4. When reassembling the disassembled plates, clean the plate surface to prevent dirt from adhering to the gasket sealing surface.

     


     


    label

    Website:

    What's new:

    Related products

    Related news

  • message
    Please enter the message here, we will contact you
    full name
    contacts
    Telephone
    Landline/phone number